Latest EMC News, White Papers & Products

27 June, 2023 Newsletter - EMC Directory

New products this week. View it in your browser


Weekly Edition
Date: 27 June, 2023

Featured Products this Week

8 kW GaN Solid-State Power Amplifier from 1 to 2 GHz for Radiated Immunity Testing

EMC Power Amplifiers from Empower RF Systems

The 2208 from Empower RF Systems is a Solid-State Power Amplifier that operates from 1 to 2 GHz. It delivers a pulsed output power of 8 kW (pulse width from 5 to 50 µs, duty cycle from 0.1 to 10%) with a gain of 69 dB and a gain adjustment range of 20 dB. This amplifier utilizes high-power GaN devices that provide wide frequency response, high gain, high peak power capability, and low distortion.

Download Datasheet Product Details

200 V/m (2 m Testing Distance) Immunity Test System from 10 kHz to 18 GHz

Immunity Test System from AR RF/Microwave Instrumentation

The SSISOV200V10K18G from AR RF/Microwave Instrumentation is an Immunity Test System with a frequency range of 10 kHz to 18 GHz. The system is designed to generate up to 200 V/m CW at a 2m test distance and complies with ISO 11451-2. It consists of 5 RF amplifiers and dedicated antennas for each amplifier (log periodic and horn antennas).

Download Datasheet Product Details

200 V Hermetically-Sealed Dual Line Common Mode Panel Mount Filter

EMC / EMI Filter from Spectrum Control

The Dual Line EMI Filter from Spectrum Control is a Dual Line Common Mode Panel Mount Filter. It provides an EMI filtering of common mode noise from 30 kHz to 1 GHz and differential mode noise filtering from 30 kHz to 10 MHz. This filter employs a common mode choke, line to ground and line to line capacitance to enable attenuation of common and differential mode voltages (noise) from both lines on inputs and outputs of AC or DC systems.

Download Datasheet Product Details

EMC Shielding Tent from 30 MHz to 1 GHz

Shielded Tent from Langer EMV-Technik GmbH

The Z23-1 Set from Langer EMV-Technik is a Shielded Tent that provides shielding from 30 MHz to 1 GHz. It consists of a frame with a shielding cover and GP 23 ground plate and provides shielding effectiveness of 50 dB. It allows shielding of measurement set-up against external RF fields or for shielding the measuring devices (such as during ESD tests).

Download Datasheet Product Details

Sponsored by EMC+SIPI 2023

2023 IEEE EMC+SIPI - Register Now!

FFT-Based EMI Test Receiver from 10 Hz to 6 GHz

EMI Receiver from Frankonia Germany EMC Solutions GmbH

The ERX-6 from Frankonia Germany EMC Solutions is an EMI Test Receiver that operates from 10 Hz to 6 GHz. This FFT-based measuring instrument is suitable for emission measurements and achieves high measurement speeds using its in-built hardware. It has a SSB phase noise of -126 dBc/Hz (@100 kHz offset) and complies with standards such as CISPR 16-1-1, CISPR 16-3, and MIL461G.

Download Datasheet Product Details

High-Accuracy EMC/EMI Pre-Compliance Test Antenna from 20 MHz to 6 GHz

EMC Antenna from Aaronia AG

The HyperLOG® 20600 EMI from Aaronia AG is an EMC/EMI Pre-Compliance Antenna that operates from 20 MHz to 6 GHz. It combines the capabilities of both a biconical as well as a log-periodic antenna to minimize measurement error rates. It provides a gain of 8 dBi and has a VSWR of less than 2:1 This antenna has 5970 calibration points (1 MHz steps) with an accuracy of 0.3 dB and can be used as a broadcasting antenna for up to 310 W (AM).

Download Datasheet Product Details

About EMC Directory

EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.

To unsubscribe please click here

[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]

Newsletters

Signup for Weekly Updates

Other Newsletters

Latest EMC News, White Papers & Products